Black Box TX/CX 4000, Manual, Page: 35 / 150

35
TX/CX 4000
COMMAND 33: DUPLEXING
3812 laser printing only. Sets the printer to duplexing mode. This applies
only to printers with duplexing capabilities.
VALUE DESCRIPTION
*0 None
1
Long-edge duplexing
2 Short-edge duplexing
Example: &%Z33,2 Sets the printer to duplex all host print jobs
along the short edge of the paper.
COMMAND 42: BUFFER PRINT
Printer goes into buffer print mode. All data is printed in hex code, which
allows the detection of any unwanted commands coming from the host.
VALUE DESCRIPTION
*0 No action taken
1 Yes, start buffer print
2 Stop buffer print (only possible from parallel or serial ports)
Example: &%Z42,1 starts buffer print
COMMAND 50: P/S TIMEOUT
Selects the parallel or serial timeout value, the time interval before the
interface automatically switches from the parallel or serial port to check
for data from the host.
VALUE DESCRIPTION
1 to 99 1 to 99 seconds
*8 Factory default
Example: &%Z50,10 sets the time interval to 10 seconds.