Black Box TX/CX 4000 Manual Download Page 85

Page: 85 / 150

TX/CX 4000

COMMAND 14: NULL LINE SUPPRESS

Selects Null Line Suppression or True Screen Image in LU3 printing mode.

VALUE

DESCRIPTION

Null line suppression in local copy and non-SCS print

Null line suppression in non-SCS print and true screen
image in local copy

True screen image in non-SCS print and null line
suppression in local copy

True screen image in non-SCS print and true screen image
in local copy

NOTES

To use this function, the RPQ should be:
IBM 3268 RPQ SC9505
IBM 3287 RPQ SC3741
IBM 4214 OPT 18=2

Available only in LU3 (non-SCS) operations.

Values 0 and 1 are only functional from CUT terminals.

Example:

&%Z14,3

Prints true screen image in non-SCS print
and local copy

COMMAND 15: CR at MPP + 1

Sets the printer in accordance with the RPQ installed in the control unit.

VALUE

DESCRIPTION

First print position (PP) of next line

First PP of current line

NOTES

To use this function, the RPQ should be:
IBM 3268 RPQ SC9501
IBM 3287 RPQ S30219
IBM 4214 OPT 15=1

Available only in LU3 (non-SCS) operation.

Summary of Contents for TX/CX 4000






















































































































































Search results

Summary of Contents for TX/CX 4000

Reviews:

Black Box TX/CX 4000, Manual, Page: 85 / 150

Search results

Summary of Contents for TX/CX 4000

Reviews: