Black Box TS560A, User Manual

Page: 55 / 67

52
LAN SOLUTION NETWORK TESTER
NIC Tx Timeout —The Ethernet interface chip used in
the LAN Solution Network Tester was not able to
transmit a packet within the time allowed. This may be
caused by a hardware problem inside the tester, a
problem with the attached cable, hardware problems
with the connected device, excessive LAN traffic, or
collisions on the LAN.
No IP Address —The DHCP server responded to the
tester DHCP request but did not provide an IP address
for MyIP.
Packet Rcv Err —An Ethernet packet was received by the
LAN Solution Network Tester with errors in the header
or packet data. This may be caused by excessive signal
noise on the Ethernet cable or a hardware problem with
the device transmitting to the tester.
PING Test Detailed Status Messages —These messages
may be displayed when the SEL button is used to access
the status details during active PINGing.
IP Add—DNS Add: The active target IP address is the
same as the DNS Server IP address, so the target PING
is automatically disabled.