Black Box TS560A, User Manual

Page: 17 / 67

14
LAN SOLUTION NETWORK TESTER
3. Operation
To power on the tester, press any one of these three
buttons: PWR, CABLE, or NTWRK. The tester will turn
on in the last mode used if you press the PWR button. If
you press the CABLE button, the tester immediately
starts executing the Jack ID test. Pressing the NTWRK
button causes the Flash Link LED test to begin.
To turn the tester off after any test, press and hold the
PWR button until the display turns off. All functions
except the Tone Generator and the Flash Link LED shut
down in 15 minutes. The Flash Link LED shuts off after
30 minutes, and the Tone Generator shuts off after 60
minutes.
When connecting to unknown jacks or cables, begin
with the power off and turn the tester on after the
connection is made. This ensures that the voltage check
will run first before any other testing.
3.1 To ID an Unknown Jack or Plug
1. With the LAN Solution Network Tester powered
off, connect to an unknown jack or plug.