36
LAN SOLUTION NETWORK TESTER
some other device on the LAN is already using that IP
address, and it reports “My IP in use on this network.”
The LAN Solution Network Tester will not continue the
PING test because using another device’s IP address is
not permissible on a LAN. The tester will restart from
this state automatically after one minute, but the value
entered for MyIP must be manually changed to try a
different IP address to prevent conflict.
PING State
Once MyIP has been verified as available (in either
DHCP On or Off modes), the next step is to enter the
active PING conversation state. The tester LCD displays
the PING Status screen, “Tg1–4” (unless disabled),
“Rtr,” and “DNS” (if DHCP On) acronyms on the top
line of the LCD. Directly under the associated acronym,
the status of each PING conversation appears.
To select any of the conversations, use the left/right
arrow buttons to move the cursor that’s on the top line
of the LCD. Press the SEL button for more detail about
that conversation. Pressing SEL once will display the
value of MyIP currently in use. Pressing SEL twice (or a
delay of three seconds) will drop into the second page of
Summary of Contents for TS560A
Page 3: ......
Page 63: ...60 LAN SOLUTION NETWORK TESTER Figure 7 5 Split pair ...
