BK Radio P150, Service Manual

Page: 97 / 264

Page 3-18 Service Manual - KNG Portables
operation
3.8.3 tGid (utG)
Selecting a Talk Group ID from the Pick List will assign the TGID to the currently select channel. All other
channels are unaffected.
Button operation
U s e r T G I D
→
D e f a u l t
T G I D - 0 1
ESC ▲ ▼ ENT
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
rky t/a menu lck
rxd Scn 1. Turn to the channel you wish to assign the TGID.
2. Press the programmed button.
utG
3. Use the up/down buttons to select the desired tone (1-32)
or select the tone using the numeric keypad.
‘
Default’
= pre-programmed TGID.
4. Press the ‘ENT’ button to set the selection.
5. Press ‘ESC’ to return to normal operation.
menu operation
U s e r T G I D
→
D e f a u l t
T G I D - 0 1
ESC ▲ ▼ ENT
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
Zer t/a menu lck
rxd Scn
Ta l k a r o u n d
T x P o w e r
U s e r T G I D s
ESC ▲ ▼ ENT
1. Press the assigned Menu button.
2. Use the up/down buttons to select ‘User TGID’.
3. Press the ‘ENT’ button.
4. Use the up/down buttons to select the desired TGID (1-32)
or select the tone using the numeric keypad.
‘
Default’
= pre-programmed TGID.
5. Press the ‘ENT’ button to set the selection.
6. Hold the ‘ESC’ button to return to normal operation.
3.9 General optionS
3.5.1 BackliGht (liGt)
When the Backlight function is programmed to a switch the display and keypad will illuminate when the
switch is on.
If the backlight function is programmed to a button the display and keypad will illuminate for the
programmed duration. (1-6 seconds or ON)
toggle switch operation
On - Slide the programmed switch toward the front of the radio.
Off - Slide the switch up toward the channel select switch.
Button operation
On - Press the programmed button.
liGt
Off - Press the button again.
liGt