BK Radio P150, Service Manual

Page: 60 / 264

BK Radio Page 2-45
installation and programming
display options
Any of the three displayed lines can be programmed to display:
options information example
Nothing Blank
Channel Label Programmed Channel Label LABEL ONE
Channel Frequency Programmed Rx Frequency switches to Tx frequency
when transmitting 151.625.00 MHz
Channel Number Active Channel Channel 1
Received Unit ID P25 ID of radio transmitting the received signal
ID’s programmed in the Call list will show the
associated label
12345 or
Call Label
Received Unit Talk Group ID TGID ID of radio transmitting the received signal TGID 12345
Pick List Selections Active Tone, NAC and Talk Group selected from
picklists T:21 N:12 TG:15
Zone Label Programmed Zone Label Zone One
Zone Channel and Number Active Zone and Channel Zone 1 Chan 1
Global priority
priority 1
When selected as Global Priority 1 the assigned channel takes priority over all other channels when
operating in the priority scan mode. When receiving activity on a scanned channel the radio will continue
monitoring for activity on the assigned priority channels. When activity is detected the radio switches to
receive the priority channel.
disabled
If checked Priority channels are selected as assigned in the radio’s currently
selected Channel Zone. (See priority options under Channel Zones)
If unchecked priority scan operation is determined by these Global Priority
settings:
use main channel
If checked the Priority 1 channel is selected by the channel select knob.
If unchecked the Priority 1 channel is assigned via the Pri Zone and
Channel selections. (See below)
tx on pri 1
If checked, the will transmit on the Priority One channel whenever the PRI
switch is on.
pri 1 Zone/pri 1 chan
Select the Zone and channel of the desired Global Priority Channel 1.
priority 2
When selected as Global Priority 2 the assigned channel takes priority over all other channels, except
Global Priority 1 channel, when operating in the priority scan mode.
When receiving activity on a scanned channel the radio will continue monitoring for activity on the assigned
priority channels.
When activity is detected the radio switches to receive the priority channel.