BK Radio P150, Service Manual

Page: 37 / 264

Page 2-22 Service Manual - KNG Portables
installation and programming
Cloning Mode
D e s t , Z o n e
→
Z o n e 1
Z o n e 2
ESC ▲ ▼ ENT
S o u r c e Z o n e
Z o n e 1
Z o n e L a b e l
ESC ▲ ▼ ENT
Z o n e - t o - Z o n e
S u c c e s s f u l l y
C l o n e d
ESC ▲ ▼ ENT
Ta l k a r o u n d
T x P o w e r
C l o n i n g
ESC ▲ ▼ ENT
C l o n e
A c t i v e Z o n e
Z o n e - t o - Z o n e
ESC ▲ ▼ ENT
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
liGt t/a menu lck
rxd Scn
On the Source radio:
Press the Menu button. 1.
Use the up/down buttons to select “Cloning”. 2.
Press the ‘ENT’ button. 3.
Use the up/down buttons to select the cloning type: 4.
active Zone - Copies the information in the Source
radio’s active zone to the Target radio’s active zone.
Zone-to-Zone - Allows for selection of any zone in the source radio
to be copied into any non- blocked zone in the Target radio.
The following additional steps are required for Zone-to-Zone cloning:
Press the Enter button. a.
Use the up/down buttons to select the desired source radio zone. b.
Press the Enter button. c.
Use the up/down buttons to select the desired target radio zone. d.
entire radio
- Copies all non radio specific data from the Source radio
to the Target radio. Radio specific data includes P25 ID, serial number,
encryption keys and passwords
Press the Enter button to send the cloning information. 5.
While sending or receiving information ‘Cloning Mode’ will be shown on the
Target radio display.
After a successful information transfer, ‘Cloning Successful’ is displayed on
the Source radio before reverting to Send Clone mode.
If the cloning process fails or the target radio’s zone is blocked form accepting
an incoming clone, A fail message will appear on the Source radio.
2.2.2.2 knG to leGacy radio cloninG
The KAA0701 cloning cable will be required in the following procedures.
Information programmed in a KNG-P150 portable can be cloned other BK Radio models on a Zone-
to-Zone basis. Entire radio cloning is not available between different radio models. Cloning compatible
models include: DPHX5102X, GPH5102XP, DPHX-CMD, GPH-CMD, DMH, GMH Plus and most GPH
portable models.
note: e-Series portables are not cloning compatable with the knG series.
NOTE: Earlier BK Radio models use the term “Group” instead of “Zone”.
cloning information
A KNG Source Radio sends only information the Target Radio requires. For example, digital settings such
as Network Access Codes will not be transferred to analog only models like the GPH.
Some zones may be blocked by PC programming to prevent them from being overwritten. Only unlocked
groups will accept incoming clones.