BK Radio P150, Service Manual

Page: 49 / 264

Page 2-34 Service Manual - KNG Portables
installation and programming
If the channel’s Transmit Mode is programmed for Mixed, the default transmit mode is set by the Transmit
Digital Mode soft switch (see Global Controls Tab for control assignment options).
Click on the box or use the spacebar to set select the desired operation.
A for Analog, D for Digital, or M for Mixed Mode.
transmit code Guard
This setting only applies to Analog and Mixed Mode channels.
Analog and Mixed Mode channels can use sub-audible signaling to allow one radio or a group of radios to
be selectively called within a system. Code Guard settings have no effect on digital only channels.
ctcSS
Enter the tone frequency for the channel. Enter out to a tenth of a Hertz. (67.0 - 250.3 Hz)
cdcSS
For operation, enter a D followed by the CDCSS code number. (000 - 777)
If inverted code operation is required, follow the CDCSS code number with a minus sign.
carrier/noise Squelch
For carrier or noise squelch, enter 000.0 for the TX CG.
user Selectable tone
Entering 000.0 for the TX CG allows for user
tone selection from the programmed pick
lists. (See Pick Lists tab)
To program a preselected Pick List tone type
“U” followed by the desired tone number
(1-32). The programmed tone will remain
associated with the channel until a different
tone is selected by the user. When reading a
radio, channels with active user selected
tones will show “UTXG” followed by the
current tone number.