BK Radio P150, Service Manual

Page: 61 / 264

Page 2-46 Service Manual - KNG Portables
installation and programming
disabled
If checked Priority channels are selected as assigned in the radio’s
currently selected Channel Zone. (See priority options under Channel
Zones)
If unchecked priority scan operation is determined by these Global
Priority settings:
use main channel
If checked the Priority 2 channel is selected by the channel select
knob.
If unchecked the Priority 2 channel is assigned via the Pri Zone and
Channel selections. (See below)
pri 2 Zone/pri 2 chan
Select the zone and channel of the desired Global Priority Channel 2.
ani/dtmf
dtmf deviation
To program DTMF Deviation, click on the Global Settings icon in the leftmost panel, then select the
General tab.
Select the deviation (0 – 4875 Hz) to be used when the radio is operating
in Wide Band Mode (25 kHz channels). This setting will automatically be
halved when the radio is operating in Narrow Band Mode (12.5 kHz channels).
ani rate
ANI encoding (Automatic Numeric Identification), if enabled, transmits a sequence of DTMF tones each
time you press the PTT switch.
To program the rate at which the DTMF tones are transmitted, click on the Global Settings icon in the left-
most panel, then select the Global Data tab.
Select 10 or 20 characters per second.
front porch time
ANI encoding (Automatic Numeric Identification), if enabled, transmits a sequence of DTMF tones
(ANI ID) each time you press the PTT switch. The Front Porch Time is the time between the PTT being
pressed and the DTMF ANI burst being transmitted.
To program the ANI Front Porch Time, click on the Global Settings icon
in the left-most panel, then select the General tab.
Backlight Settings
To program display/keypad lighting, click on the Global Settings icon in the left-most panel, then select
the General tab.