INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Bisolid Automat OM-BAV04/10/2017/EN
26
3. DESCRIPTION OF THE TUBE PELLET BURNER WITH ROTARY
CLEANING BISOLID GP XX R TSC
The tube pellet burner with rotary cleaning Bisolid GP xx R tsc is a steel made construction
and is designed on the principle of feeding the wood pellets through a feed auger, then
through a flexible connection on the grate of the burner
’
s combustion chamber, where the
process of fuel and oxidizer (combustion air) combustion takes place.
The burner operates automatically, including: initial wood pellet loading, firing, inflammation,
combustion, controlling combustion process parameters when using preferred fuel (wood
pellets) and other suitable fuel in the form of firewood or wood chips, controlled stop when
reaching the water temperature and (or) receiving a signal from the room thermostat,
controlled power reduction in burning other suitable fuel (firewood or wood chips), final
blowing when using preferred fuel (wood pellets). In the optimization mode, at the operation
with a room thermostat, optimized modulation is carried out based on the thermal
performance of the site.
The tube pellet burner Bisolid GP xx R tsc is designed to burn wood pellets according to
standard EN ISO 17225-2:2014, classes A1, A2 and B with the relevant quality
characteristics and also pellets with categories: A, AB, B, BC and C, according to the
methodology preared and applied by the manufacturer. The fuel and air are mexed in the
burner in controlled way and it is a reason for ecological combustion and high efficiency.
The pellet burner is equipped with a display, which indicates the burner
’
s current parameters
and/or allows for adjustment of its operating parameters.
The main advantages of the tube pellet burner Bisolid GP xx R tsc are:
Innovative rotary combustion chamber - stable efficiency and low emissions with
minimal user intervention.
A system for mixing fuel into the combustion chamber, which increases the
cleaning of the ash, improves the combustion process and relieves servicing.
Ability to burn wood pellets with a diameter of 6-8 mm and low quality (high ash
content), which is not possible with burners with air cleaning and / or compressed
air.
Completely compatible with automatic control of a wide range of solid fuel boilers.
Suitable for installation of furnaces for bakery products.
Precision modulation of heat output.
The components of the burner are manufactured by well known and proved
European companies from Germany, United Kingdom and others.
High quality ignition element manufactured in Japan, that ensures over 37 000
ignitions.
The combustion chamber is produced by special heat resistance steel, which
ensures long service life.
Manual test of all functions.
Indication of the hot water temperature in the boiler.
Photosensor for accurately detection and monitoring of the flame intensity.
Possibility to save the current settings and to reset to factory default settings.
Automatic start after voltage drop - preserving last settings.
Password protected access levels - for the service technician and manufacturer.
Ability to operate with a room thermostat.
Possibility to control exhaust gas fan, which eliminates the problem with the
draught into the chimney and guaranties the safety operation of the product.
