INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Bisolid Automat OM-BAV05/02/2018/EN
41
The user has to periodically, at least once per day or longer, depending on the fuel ash
content, but no longer than five days of operation, to switch off the burner. This measure
guarantees effective after-burning of the fuel and combustion chamber cooling.
After the pellet burner cools down the ash and/or slag must be cleaned from the combustion
chamber fire-grate. The flexible pipe connecting the fuel transport auger and the burner fuel
inlet pipe must be cleaned from dust at least once per week.
Dust depositing on the flexible pipe walls can lead to distortion of the fuel
feeding, ignting the dust as a result of emergency situation, in consequence of
which hot flue gasses might pass through it.
It is necessary that the user is fully introduced with the information presented in
the current operation manual, in connection with the pellet burner operation, its
control and servicing.
5.10. BOILER REPAIR
The user may only carry out replacement of spare parts as per the attached list. Large scale
repairs should be performed only by an installation or service provider.
Boiler service personnel is entitled to perform only repair activities that do not require special
qualification and represent simple replacement of parts such as grates, sealing ropes, ceramic
blocks, secondary air pipe and smoke damper. All other failures should be repaired by an
authorized service provider.
Only genuine spare parts should be used when repairing the boiler.
5.11. WARRANTY AND WARRANTY TERMS AND CONDITIONS
We pay attention to users that commissioning and service maintenance of all Bisolid Automat
hot water boilers should be performed by a specialized installation company. Otherwise, any
eventual warranty claims shall not be accepted. Warranty issues are claimed immediately after
detecting the defect. The warranty period is indicated in the warranty card, which is provided
as a basic accessory to the boiler and is determined by precise following the instructions in the
current installation, operation and maintenance manual. The Buyer has to submit a warranty
claim in writing to the Seller or to an authorized service provider.
The manufacturer reserves the right to make changes, related to the product
technical optimization.
5.12. BOILER ACCESSORIES UPON DELIVERY
Bisolid Automat series hot water boilers are delivered fully assembled and functionality tested.
Bisolid Automat boilers accessories upon delivery are presented in Table 7.
