birddog NDI P200, User Manual

Page: 23 / 66

19
White Balance Menu
The WHITE BALANCE menu allows you to choose from several white balance modes.
WB MODE (White balance mode)
Select the white balance mode from the following:
AUTO: This mode computes the white balance value output using color information from the entire
frame with a range of values from 2500K to 7500K. This mode is the default setting.
INDOOR: Sets the color temperature to 3200K.
OUTDOOR: Sets the color temperature to 5800K.
OPW (One Push White Balance): The One Push White Balance mode is a fixed white balance mode
that may be automatically readjusted only at the request of the user (One Push Trigger), assuming that
a white subject, in correct lighting conditions can occupying more than 1/2 of the image. One Push
White Balance data is lost when the power is turned off. If the power is turned off, you'll need to reset
One Push White Balance.
To select OPW:
1. Place a white subject (For example: A piece of white paper) in the center of the frame.
2. Press the HOME button of the infrared remote controller. The one-push white balance adjustment
is activated.
ATW (Auto Tracking White Balance): Auto Tracking White balance (2000K to 10000K), allows the
camera to adjust the white balance according to the temperature of the light source illuminating the
subject.
USER: This is a mode that enables you to manually set the control of Red and Blue gain up to 256 steps.
OSD
EXPOSURE
WHITE BALANCE
PICTURE 1
PICTURE 2
PAN TILT ZOOM
SYSTEM
WHITE BALANCE MENU
WB MODE AUTO
OSD
EXPOSURE
WHITE BALANCE
PICTURE 1
PICTURE 2
PAN TILT ZOOM
SYSTEM
WHITE BALANCE MENU
WB MODE
R GAIN
B GAIN USER
106
217