46
DIP Switch Settings
The DIP switches are for setting the camera configuration for following items.
The Camera ID address and video resolution settings (below) can be also be set via the camera OSD
menu. The camera can be set either using the OSD menu or DIP switches. They override each other -
after the camera is turned on, the most recent setting is used.
1.
Camera ID Address for RS-485 PELCO protocol.
2.
Video output / Video color space.
3.
RS-232 / RS-422/485 selection.
4.
RS-232 / RS-422/485 baud rate.
5.
Video resolutions selection.
6.
IR remote controller ID.
Setting the DIP Switches
Turn off power to the camera before
changing the DIP switch settings.
Power on the camera to have the new
DIP switch setting activated.
1.
Bit 1~3: Camera Address setting
for VISCA protocol
2.
Bit 4: Video Output/Video Color
Space
3.
Bit 5: Reserved
4.
Bit 6: RS-232/RS-422
5.
Bit 7~8: RS-232/RS-422 Baud
Rate
Summary of Contents for NDI P200
Page 1: ...USER GUIDE NDI...
Page 65: ...WELCOME TO THE FUTURE...
Page 66: ...bird dog tv hello bi rd dog tv...
