44
Controlling Your Camera Via Other Protocols
P200 also supports control via VISCA-over-IP, RS-232 and RS-422/485. This section details how to
configure control under these protocols.
When the camera is connected to a computer and joystick keyboard with a VISCA cable (cross type,
RS-232), you can operate the camera with the computer and the joystick keyboard.
When the camera is connected to a joystick keyboard a control cable (cross type, RS-422/485), you
can operate the camera’s pan, tilt, zoom with the joystick keyboard.
In this connection configuration, a HDMI cable, SDI video cable, data cable and network cable is re-
quired. To obtain these third-party components or accessories, consult the dealer where you bought
your camera.
Camera Initial setting status Information
The following information of the camera initial setting status will display on the monitor for 5 seconds.
1.
Camera PELCO ID for RS-485 control.
2.
Camera ID for IR Remote Controller.
3.
IR remote control signal receive current setting.
4.
Baud Rate current setting.
5.
Control COMM Port current setting.
6.
Video format current setting.
7.
HDMI current setting.
8.
Model number.
9.
Firmware version.
CAMERA STATUS INFO DISPLAY
PELCO ID
IR ID
IR-RECEIVE
BAUD RATE
COMM TYPE
FORMAT
HDMI OUT
MODEL TYPE
SV
001
01
ON
9600
422
1080p29.97
YUV
EYES P200
V0B1100S36[...]
Summary of Contents for NDI P200
Page 1: ...USER GUIDE NDI...
Page 65: ...WELCOME TO THE FUTURE...
Page 66: ...bird dog tv hello bi rd dog tv...
