birddog NDI P200, User Manual

Page: 33 / 66

29
NDI Set Up
Web Configuration Panel
The web configuration panel (Web UI) allows you to alter key settings of P200, such as A/V settings,
video frame rates, restarting the video processing engine, changing networking parameters, recalling
PTZ presets and applying firmware updates.
Access via web browser (URL)
P200 is configured to automatically receive a network IP address from the computer network via
DHCP (Dynamic Host Configuration Protocol). Most corporate, education and home networks have a
DHCP server present on the network to allow this to occur. Usually your Internet Router provides this.
If P200 receives an IP address automatically from this server (DHCP), the IP address can be discovered
in several ways, including BirdDog Central Lite available from: http://www.bird-dog.tv
Your computer will need to have ‘Bonjour’ services loaded in order to access the unit via it’s user
defined name. Apple devices come pre-installed with Bonjour, while Windows devices need a plugin
available here: support.apple.com/kb/dl999?locale=en_AU
Accessing P200 on a network without a DHCP server
Some standalone or private networks may not have a DHCP server. After 30 seconds of searching for
an automatically assigned IP address P200 will fall back to a default address which is: 192.168.100.100
In order to access the Web UI on a network which is configured to a different subnet, change your
computers IP address to match the BirdDog unit. Once you gain access to the Web UI, choose your IP
address to match the rest of the devices on your network.
For instructions on setting your computers IP address, please consult your computer operating system
manual or IT support resources.