BIRD SITE ANALYZER SA-1700EX, Operating Instructions Manual

Page: 59 / 171

Measure Match Mode
45
1. Be sure that you are in either Measure Match
mode or Fault Location mode.
2. Recall a trace (refer to Recall a Saved Trace, page
104).
3. Follow the numbered steps in Figure 16 on
page 45 to set markers on a recalled trace.
Figure 16 Using Markers with Recalled Traces
800.00 MHz 1600.00
Rcl-M1: 0.00 2.06
Calibration: Full
M1: 925.00 5.82 Dual Mode
Active
Mark 1
Measure Match [ ] 238 Pts
10.00
1.00
V
S
WR (0.00/
)
000, TX 016, 01-MAR-2003 12:00
1
5
2
3
4
Step Action
1 Press the Marker key
2 Select single mode or dual mode
3 Select a marker
4 Press the left or right scroll key to move
the marker
5 Press Esc to return to the test screen