BIRD SITE ANALYZER SA-1700EX, Operating Instructions Manual

Page: 125 / 171

Measure Power Mode
111
Chapter 6 Measure Power Mode
Note:
The figures in this chapter do not show the
entire Site Analyzer. The figures show only the screen
image and the keys you press to accomplish a setup or
measurement.
Note:
Power measurement comes standard on
all models except the SA-1700EX. To upgrade a SA-
1700EX to aN SA-6000EX, which has power measure-
ment capability, please contact Customer Service.
This measurement verifies and monitors the condition
of the transmitter system. Multiple measurement val-
ues can be simultaneously displayed, depending on the
sensor. One measurement is also displayed on an ana-
log dial. Sensors compatible with the Bird Site Ana-
lyzer include Bird VSWR Monitors and Broadcast
Power Monitors, as well as the Bird 5010B, 5011, and
5012.
Press the keys indicated in the following figure to
enter the Measure Power mode.
Press the
Mode key
Warning:
Do not apply power to the RF test port.
An external sensor is required to
measure RF power.
Measure Power Mode
Waiting for Sensor...
PwrUnit
Watts
Press from
Select Mode