BIRD SITE ANALYZER SA-1700EX, Operating Instructions Manual

Page: 108 / 171

Bird Site Analyzer
94
Label Text Shortcuts
Typically when you enter or edit label text, you use the
right and left scroll keys to select columns of letters.
Using shortcuts allows you to select a column of letters
by pressing a number on the key pad. When you
enable shortcuts, each column is identified by a num-
ber at the bottom. When shortcuts are enabled, press
the number key once to select the column, and twice to
enter a number.
To enable or disable shortcut keys, you must be in
either Measure Match mode or Fault Location mode.
1. Press the Save/Recall soft key.
2. Press the Save soft key.
3. Press the Config key.
4. Follow the numbered steps in Figure 44, page 95
to enable or disable the label shortcuts.
Step Action
1 Press the right and left scroll keys to
select a character column
2 Press a soft key to enter the letter indi-
cated at its right
3 Label name appears as characters are
entered
4 Text cursor indicates where next charac-
ter will be entered
5 Press the Delete key to remove the charac-
ter immediately at the left of the text cur-
sor
6 Press the up and down scroll keys to move
the text cursor to select a character in the
label text (type over function)
7 Press the Enter key to accept the label
text
8 Press the Esc key to exit Save and Recall
mode