BIRD SITE ANALYZER SA-1700EX, Operating Instructions Manual

Page: 90 / 171

Bird Site Analyzer
76
Test for Fault Location
1. Connect the Site Analyzer to the cable being
tested.
Note:
If you calibrated the Site Analyzer
with a phase stable cable connected to its
antenna port, do not remove the cable. Con-
nect it to the cable to be tested.
2. Wait at least 10 seconds for the sweep to update.
When you have a trace on the screen, you can do any of
the following:
•
Hold the trace (refer to Measurement Hold, page
78)
•
Add markers to the trace (refer to Markers, page
79)
•
Save the trace (refer to Save Trace, page 92)
•
Print the trace (refer to Printing, page 89)