BIRD SITE ANALYZER SA-1700EX, Operating Instructions Manual

Page: 35 / 171

Measure Match Mode
21
Note:
Changing the frequency settings will auto-
matically turn calibration off. Always set the
frequency before calibrating the unit.
Note:
If you enter a frequency that is outside of
the range of the Site Analyzer, the Site Analyzer will
override your entry and set the minimum or maximum
frequency of the model.
1. Make sure that the unit is turned on and in the
Measure Match mode (refer to Select the Measure
Match Mode, page 19).
2. Follow the numbered steps in Figure 4 on page 22
to set a custom frequency or follow the steps in
Figure 5 on page 23 to select from a preset band
list.