BIOS BR256, User Manual, Page: 80 / 110

BIOS CORPORATION
－
79
－
4.4 How to deal with
｢
SYSTEM DOWN
｣
When
「
SYSTEM DOWN
」
occurred, data was assumed to be corrupt and could not be recovered.
Please suspend data write
When
「
SYSTEM DOWN
」
occurred during writing data, the data is not
considered reliably. Please write the date again after system recovery.
■
Steps to check for RAID 0
①
Press MODE button to stop buzzer
②
It is recommended to backup your data before
performing recovery. There is possibility that
the system might not work normally during
recovery process even after power recycling.
③
Stop the application and Shutdown host
computer
If the system hang up during the normal
shutdown
process, please remain
system power-on and contact your
support
window. There might be
possibility that data will be corrupted.
④
Shutdown both computer and BR256
⑤
Press and hold the MODE button then turn on
BR256 power
⑥
If LCD showed
「
RAID-x NORMAL
」
, it means
BR256 came back to normal. There might be
temporary contact error between HDD and the
backplane. If the system did not come back
to normal, or
「
SYSTEM DOWN
」
is
encountered soon, you should contact your
support window.
※
User can try to replace the suspicious
HDD with a new one. If the situation
remains unchanged, you should
contact your support.
SYSTEM
DOWN
○
Press MODE button to
stop buzzer
Recommend to Backup
your data first
Terminate the app and
shut down computer
Press MODE button and
turn on BR256
RAID-x
NORMAL
SYSTEM
DOWN
○
Yes
No
There might be Alphabet
shown on the message,
please take a memo on it
。
メモしておいてください。
Shutdown BR256
RAID-Normal
？