BIOS BR256, User Manual, Page: 35 / 110

BR256
（
eSATA+USB3.0
）
model User Manual
－
34
－
2.5 Background Parameters
This section describes background parameters for maintenance configured before shipment.
There are two parts of these parameters, Fixed and Changeable ones.
Changeable background parameters follow with fixed parameters.
Please take a memo before you apply to change the default parameter value. Refer to
Sec.2.5.2 Parameter Confirmation. Default setting is always recommended unless
there is special requirement for the change.
2.5.1 Method to setup background parameters
Please make sure you understand exactly the purpose that you are changing from the default
parameters.
1
．
Holding both the Mode and Select button, power up.
ARRAY PARAMETERS
SETTING!
2
．
Press the SELECT button, Fixed Parameters start with Firmware version
Firm ware is
Ver.x.xxx
Firmware version will be displayed
3
．
Press the SELECT button
Vender ID is
BIOS
Vendor ID will be displayed
4
．
Press the SELECT button
Product ID is
BR256B3-xxx6
Product ID will be displayed
5
．
Press the SELECT button
Serial No ID
xxxxxxxx
Serial number of BR256 will be displayed
6
．
Press the SELECT button
End of
Fixed Parameter
Indicate the end of the fixed parameters.
After fixed parameters, if you press the Mode button now, you will enter Background Parameter mode.