BIOS BR256, User Manual, Page: 54 / 110

BIOS CORPORATION
－
53
－
2.6.6 Mail Format
The mail format will be looked like below:
From: BR256@[192.168.50.210]
To: test@bios.co.jp
Subject: Alert from BR256
Alert Condition of BIOS BR256xx-xxx6 Ver.x.xxx
Serial Number= xxxxxxxx
Alert Reason = Test of Send Mail.
１）
From: Mail sender, this machine
２）
To: Receiver
３）
Subject:
４）
Alert Condition of vendor name, device name, and version.
５）
Serial Number: the serial number of this device
６）
Alert Reason: Cause of this email sent
2.6.7 Conditions of Mail Notification
Under below conditions, the mail will be sent:
１）
Drive failure One Drive Down
Two Drives Down
System Down
２）
Completion of Drive Recovery Recover Finished
３）
System Power Off Power Unit Down
４）
Fan is failed Fan Unit Down
If the event was remained, the same email will be sent again upon the power recycling. If there are more
than two events happened at the same time, only the first one will be sent.