BIOS BR256, User Manual, Page: 27 / 110

BR256
（
eSATA+USB3.0
）
model User Manual
－
26
－
●
Recovery Rate Setup
RECOVER RATE
5Min. /GB
Recovery operations utilize time between host data access without interrupting the current job.
Therefore data read/write can be continued without interruption.
User can choose the timing to execute recovery operations as below.
Parameter Function Memo
RECOVER
WAIT
TIME 0 Sec
Recovery request will be processed immediately between host
commands. Recovery will always be processed therefore host
access will be slow down. Select this mode if you want the
recovery have high priority.
RECOVER
WAIT
TIME 0.1 Sec
Continuous host commands will be processed first. Recovery
operation will be taken care when the interval between host
commands longer than 0.1 sec. The following host command has
to wait till one recovery task completed except READ/WRITE or
READ Cache command which will be executed immediately.
RECOVER
WAIT
TIME 1 Sec
This can be used when host access are not concentrated.
The wait interval following the last host command is 1 sec. On
this mode, the recovery operation will not be processed if the
host commands are continuous with less than 1 sec internal.
RECOVER
WAIT
TIME 10 Sec
Usually this should not be used.
Probably this mode can be applied if there is very little host
access.
RECOVER
RATE
2Min./GB
5Min./GB
10Min./GB
20Min./GB
This is to assign a fixed recovery time for 1GB capacity despite of
interval to wait between host commands.
Yet there is possibility that 5Min./GB cannot be finished in
time
Default
5Min./GB