BIOS BR256, User Manual, Page: 52 / 110

BIOS CORPORATION
－
51
－
2.6.5 Setup of email notification
＜
Mail Setup
＞
Mail Setup
It allows you to change email sending parameters and send a test email.
It is necessary to login to Management Mode or Setup Mode before you can make the change.
Click on
[
Mail Setup
]
from the main menu.
＜
Page for setup mail parameters
＞
●
Sender Address BR256@192.168.50.210
Up to 63byte alphabet, number,
“_”, “-“, “@”, and “.” is allowed. Two byte characters such as Chinese
are not allowed.
●
Receiver Address test@bios.co.jp
Up to two receivers address are allowed.
For users who want to have more than 2 receivers, you need to setup alias on assigned email server.
Allowable characters are same as Sender address.
●
SMTP Server Address 255.255.255.255
Setup IP Address of SMTP server.
IP of 255.255.255.255 will prohibit emails to be sent out.
１）
Directly setup the IP to SMTP server
This is most effective way to issue email alert. However Gateway address might be necessary if
SMPT server is not within the same LAN. (see Basic Parameter, Setup page) At the same time,
this will expose the BR256 accessible from outside of LAN. This might cause the security issue.
２）
Assign local SMTP Server
If there is no need for authentication, you can forward (relay) from BR256 by setting up the local
SMPT server. For Windows OS, you can setup IP address of BR256 on SMPT which has the
RELAY function.
●
Send Test Mail
（
button
）