BIOS BR256, User Manual, Page: 103 / 110

BR256
（
eSATA+USB2.0
）
model User Manual
－
102
－
※
An error message will be popped up if you are not in Management Mode.
⑤
Setup IP address of your SNMP server on
「
SNMP Trap Server
１
/
２」
. If server is not located within LAN,
please input same IP address of your Gateway.
⑥
Click on to save your change.
⑦
Setup the level of status monitor. Total there are three categories explained as below
Level Importance Example
Notification Low-High Importance Power On
Warning Medium-High Importance End of Recovery
Critical Only High Importance System Down
⑧
Click after you choose level. Below message will be shown. And please refer to
the status monitor section for confirmation.
Send Test Trap.
Sending Test Trap. Please Check It.
Send Test Trap.
Bad SNMP Server Address.
＜
Succeed
＞
＜
Failed
＞