BIOS BR256, User Manual, Page: 45 / 110

BR256
（
eSATA+USB3.0
）
model User Manual
－
44
－
2.6 Web-based Monitor and Setup via Ethernet
To monitor BR256 via Web management GUI, you can connect Ethernet cable to a host computer.
2.6.1 Web Connection
To use Web management, Ethernet parameter must be configured correctly before launching a Web
browser (such as Internet Explorer). For IP Address configuration, please follow steps below.
●
Parameter Setup Mode
First press MODE and SELECT button at power on BR256. The system will enter Parameter Setup
mode as shown on LCD display.
●
IP Address Setup
Press SELECT then MODE; it will enter IP address setup parameter.
Use SELECT button to change the number and MODE to switch to next field.
Hold SELECT button then number will rise faster.
After setting up, press MODE and SELECT at the same to save the change
Before the Save operations, the IP address will not be changed.
The new IP address will be effective after system reboot.
●
Default IP address
The default IP address of the product is 192.168.50.210
ARRAY PARAMETERS
SETTING
IP Address
192.168. 50.210
POWER DOWN
PLEASE!