biochrom HB Ultrospec 7500, User Manual

Page: 79 / 104

Ultrospec 7500 User Manual • 41 56 2050 REV03 • 79
Step 4
Proceed to the next parameter screen using the right/forward arrow.
Step 5
Set auto print to “On” or “Off”. If auto print is set to “On”, select the
print to hardware from “Internal Printer”, “PC via USB”, or “USB Mass
Storage” depending on what hardware is connected to the instrument.
Step 6
Set auto save to “On” or “Off”. If auto save is set to “On”, select the save
to hardware from “USB CSV”, “USB”, or “Internal” depending on what
hardware is connected to the instrument.
Step 7
Proceed to the next parameter screen using the right/forward arrow.
Step 8
Set whether to use as single cell to “On” or “Off”. If set to “Off”, set the
position prompt per sample to “On” or “Off”, set the number of samples
to between 2 and 100, and set whether to retake the reference between
reload to “On” of “Off”.
Step 9
Proceed to the measurement screen using the right/forward arrow.
If using a single cell holder, or a cell changer set to use as a single cell
holder, skip steps 10 through 11 and go straight to step 12.
Step 10
Press the batch measurement icon, then load the cell changer according
to the cell changer prompt. Then select the confirm icon.
Step 11
The acquired reference sample baseline will have be applied to all
subsequent sample measurements. The sample measurements can be
viewed by pressing the sample name test box and selecting the
appropriate sample from the list.