Biocare iM 12, User Manual

Page: 39 / 196

Chapter 3 Basic Operation
User Manual of Veterinary Monitor --27--
In the standard interface layout window, the user can allocate positions to different parameters and waveforms.
Those parameters and waveforms without allocated positions won‘t be displayed on the standard interface.
Figure 3.3 Standard Screen Layout Setup
Functions with displayed waveforms and their corresponding waveforms can be set up in Region 1. The
corresponding waveform will be displayed on the left in the same row.
The last setup item in Region 1 shares the same position with Region 2 (i.e., Temp, NIBP list, NIBP, and Gas) on
the main screen; the digital display module will be free layout On the bottom of the main screen. When the last
item in Region 1 is not set as off, and Temp, NIBP parameter lists and gas will not be displayed on the main
screen.
The system will arrange the current displayed waveforms automatically to achieve an optimal display effect.
When associated parameters or waveforms are not displayed on the interface after a module is added, please
check:

Whether the lead cable, cable, sensor or external add-in equipment has been well connected to the module.

Whether there is the prompt that the associated parameter has not been turned on in the prompt region at the
bottom of the screen. If there is such a prompt, please enter [Screen Setup] for the associated parameter and
waveform setup.
Attention

The most waveform of Standard Screen Layout Setup for 12 inches monitor is ten and the most
waveform of Standard Screen Layout Setup for 15 inches monitor is eight. The Standard Screen
Layout Setup in this chapter is as 15 inches monitor for example.