Biocare iM 12 User Manual Download Page 124

Page: 124 / 196

Chapter 7 Alarm

--112--

User Manual of Veterinary Monitor

Figure 7.3 Alarm Setup Menu

This window includes: 1. Global Alarm 2. Parameter Alarm 3. ST Alarm 4. Arrhythmia Analysis and 5.

Arrhythmia Threshold.

Please refer to Section 7.5 for the Global Alarm Setup. For the ST Alarm Setup, please refer to Section 6.1 on

ECG for the Arrhythmia Analysis Setup and Arrhythmia Parameter Threshold Setup.

7.7.2 Parameter Alarm Setup

Select [Main Menu] - [Alarm Setup] - [PAR.Alarm], and users can view and revise the warning On/Off state,

warning upper and lower limits, warning levels and alarm record On/Off state of all parameters in the current

measure.

Figure 7.4 Parameter Alarm

Attention



This alarm triggers the recorder to output the waveforms of this alarm and values of all parameters

only when both the alarm switch and the alarm records of a parameter are set [On].

Summary of Contents for iM 12





































































































































































































Search results

Summary of Contents for iM 12

Reviews:

Related manuals for iM 12

Brands by name

Popular brands

Biocare iM 12, User Manual

Search results

Summary of Contents for iM 12

Reviews:

Related manuals for iM 12

Brands by name

Popular brands