Biocare iM 12, User Manual

Page: 75 / 196

Chapter 6 Parameter Monitoring
User Manual of Veterinary Monitor --63--
Connection of Pulse Oximetry Probe
The pulse oximetry probe is a complex measuring instrument which should be used for measuring by following
current methods and steps. Improper operational method may cause damages to the probe.
Steps of Operations:
1. Connect the plug of the pulse oximetry probe to the corresponding ‗SpO
2
‘ interface on the left panel of the
monitor. Please push or pull plug by using fingers to hold the plug head.
2. Insert the forefinger or middle finger or ring finger of the subject into probe by referring to Figure 6.24.
Figure 6.24 Diagram on Pulse Oximetry Probe and Finger Positions
Attention

Don
‟t fold or twist the cables.
6.4.5 SpO
2
Setup
Open the [SpO
2
Setup] menu by:

Select [Main Menu]-[Parameters], and select [SpO
2
Setup].

Select SpO
2
waveform region or parameter region to enter [SpO
2
Setup].
Figure 6.25 SpO
2
Setup (SpO
2
Module ) Figure 6.26 SpO
2
Setup (Masimo SpO
2
Module)