Biocare iE 101 User Manual Download Page 28

Page: 28 / 82

Chapter 2 Preparation

-- 18 -- User Manual for Electrocardiograph

Remove the roller.

Insert the roller into the Rolling Paper.

Load the recording paper fitly into the Paper Drawer. And make sure the grid side of the paper facing

downwards and towards the Thermal Print Head.

Pull out the paper about 2cm and press to close the Paper Drawer cover.

CAUTION



Please make sure the recording paper is installed fitly and straightly, otherwise it may be stuck.



If paper is absent, or used up, or not placed well, alarm will appear on the main interface and the machine

does not print.

2.3 Connect to Power Supply

Figure 2- 2 Connect to AC Power Supply

Connect the AC Power Cable to the ECG machine and the Power Outlet

Connect Equipotential Cable to the ECG machine and the Equipotential Terminal in the room.

EXPLANATION

The ECG machine is equipped with a built-in rechargeable battery and requires no extra installation. The operator

needs to check the battery’s capacity before usage.

Summary of Contents for iE 101



















































































Search results

Summary of Contents for iE 101

Reviews:

Related manuals for iE 101

Brands by name

Popular brands

Biocare iE 101, User Manual

Search results

Summary of Contents for iE 101

Reviews:

Related manuals for iE 101

Brands by name

Popular brands