Biocare iE 101, User Manual

Page: 41 / 82

Chapter 4 ECG Recording
User Manual for Electrocardiograph -- 31 --
CAUTION

After the heart rate and waveforms are stable, you can print out the ECG waveforms together with the
interpretation.

This ECG machine can detect the lead connecting status continuously, and if leadoff is detected, the
corresponding lead code will flash in the Alarm Area on the main interface, accompanied by sound alarm.
When “Lead off” continues, please check carefully the connections from skin to the ECG machine (including
electrodes and lead wires). Alarm will disappear when connections become reliable.
4.3 Introduction of Record Mode
EXPLANATION

Set up the Waveform length to be printed and uploaded in [Menu] > [ECG Setting] > [Wave Sample Time] .

In [ECG Setting] , if [Auto Upload] is enabled, the ECG machine will automatically upload the waveforms
and the reports after printing the waveforms.

If [Auto-save] is enabled, the ECG machine will automatically store the waveforms and reports after printing
the waveforms.

If the waveforms and the reports need to be stored to a specified memory, go to [System Setting] > [Default
Memory] and select the desired memory: [Internal Memory] or [USB Flash Drive] .