Biocare iE 101 User Manual Download Page 16

Page: 16 / 82

Foreword

-- 6 -- User Manual for Electrocardiograph

functions during operation, please do not use it for longer until the adverse affect is identified and eliminated. The

appropriate preventing measures are given below by this manual for such cases:



Influence of radiated electromagnetic wave:

The use of a mobile phone may affect this ECG machine. Instruct all the people around to turn off their

mobile phone or mini-radio devices when any medical electronic device is in use.



Influence of impact and conductive electromagnetic waves:

The high frequency noise produced by other devices can be introduced into this ECG machine through the

alternating current socket. Please identify the noise source first, and if possible, stop the working of related

devices. If they are not allowed to be stopped, measures such as application of noise abatement device should

be taken to minimize the influence.



Influence of static electricity:

The static electricity in a dry environment (indoor) may affect this ECG machine, especially in winter. Please

humidify the indoor air or pre-discharge the static electricity on the cable and the electrocardiogram

recording personnel prior to using this ECG machine.



Influence of thunder and lightning:

A thunder and lightning strike nearby may cause voltage surge in this ECG machine. You can unplug the

power supply and run the ECG machine using its internal battery in case of any danger.

Instrument classification

Methods

Class

By Type of Protection Against Electric Shock

Class I, internal power supply

By Degree of Protection Against Electric Shock Type CF applied part

By Degree of Liquid Proof

Ordinary equipment (enclosed device without liquid proof)

By Level of Protection Against Explosion

This equipment is unsuitable for use in an environment with

air, oxygen or nitrous oxide mixed with flammable anesthetic

gas.

By Mode of Operation

Continuous operation equipment

Summary of Contents for iE 101



















































































Search results

Summary of Contents for iE 101

Reviews:

Related manuals for iE 101

Brands by name

Popular brands

Biocare iE 101, User Manual

Search results

Summary of Contents for iE 101

Reviews:

Related manuals for iE 101

Brands by name

Popular brands