Biocare iE 101, User Manual

Page: 49 / 82

Chapter 5 Setting System Parameters
User Manual for Electrocardiograph -- 39 --
5.2 Print Setting
Enter [Printer Setting] to adjust parameters of the Printer. See following table:
Name Value Default Description
Gray Level 1
～
8
4 (iE 101)
5 (iE 300)
Select one option for gray level.
Baseline Width 1
～
4 2
Select one option for waveform
thickness.
Print Speed
5 mm/s, 6.25 mm/s, 10 mm/s,
12.5 mm/s, 25 mm/s, 50 mm/s
25 mm/s Select one option for paper speed.
Report Format
Simple Report, Median Beat
Report, Manual Report, Disable
Simple Report Select one option for report format.
File Print
Format
Current Page, Simple Report,
Median Beat Report, Detail
Report, Waveform
Current Page
Click to select the format to print the
report.
Print Grid Disable, Enable Disable
Select whether to print the grid on the
paper.
PDF Grid Disable, Enable Enable
Select whether to print the grid on the
PDF file.
Printer
Built-in Thermal Printer,
Disable
Built-in
Thermal Printer
Select whether to print using built-in
printer.
Record Mode
Refer to the Appendix B
Technical Specification and the
machine your purchased.
Auto Select one option for report mode.
Record Format
Refer to the Appendix B
Technical Specification and the
machine your purchased.
Select one option for report mode.
Auto Print
Disable, Enable Disable Auto Print is disabled in iE 101/300.
Print Data Type Real Time, Synchronous Real Time
Select one option for print data type
(Only apply to iE 300).