Warranty
|
xxiii
Warranty
This Warranty is limited and applies only to new products, except for computer-based
software, which is covered under a separate Warranty Policy, manufactured by Bio-Tek
Instruments, Inc. (“Bio-Tek”). Bio-Tek makes no warranty whatsoever regarding the
condition of used products.
Bio-Tek warrants the instrument (hereinafter collectively referred to as “Products” or
“Product”) for a period of one (1) year from the original purchase date against defective
materials or workmanship. This Warranty is limited to the original purchaser (the
“Purchaser”) and cannot be assigned or transferred. All claims under this Limited
Warranty must be made in writing to Bio-Tek, Attention: Service Department. Purchaser
must ship the Product to Bio-Tek, postage pre-paid. Bio-Tek shall either repair or replace
with new or like new, at its option and without cost to the Purchaser, any Product which
in Bio-Tek’s sole judgment is defective by reason of defects in the materials or
workmanship.
This Warranty is VOID if the Product has been damaged by accident or misuse, or has
been damaged by abuse or negligence in the operation or maintenance of the Product,
including without limitation unsafe operation, operation by untrained personnel, and
failure to perform routine maintenance. This Warranty is VOID if the Product has been
repaired or altered by persons not authorized by Bio-Tek, or if the Product has had the
serial number altered, effaced, or removed. This Warranty is VOID if the Product has
not been connected, installed, or adjusted strictly in accordance with written directions
furnished by Bio-Tek. Batteries, fuses, light bulbs, and other “consumable” items used in
any of the Products are not covered by this Warranty. Software utilized in conjunction
with any of the Products is not covered by the terms of this Warranty but may be
covered under a separate Bio-Tek software warranty.
We will continue to stock parts for a minimum period of five (5) years after the
manufacture of any equipment has been discontinued. Parts shall include all materials,
charts, instructions, diagrams, and accessories that were furnished with the standard
models.
THIS WARRANTY CONTAINS THE ENTIRE OBLIGATION OF BIO-TEK
INSTRUMENTS, INC., AND NO OTHER WARRANTIES, EXPRESSED, IMPLIED, OR
STATUTORY ARE GIVEN. PURCHASER AGREES TO ASSUME ALL LIABILITY FOR
ANY DAMAGES AND/OR BODILY INJURY OR DEATH THAT MAY RESULT FROM
THE USE OR MISUSE OF ANY EQUIPMENT OR INSTRUMENT BY THE
PURCHASER, HIS EMPLOYEES, AGENTS, OR CUSTOMERS, OTHER THAN THE
EXPRESS WARRANTY CONTAINED HEREIN. WE SHALL NOT BE RESPONSIBLE
FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND. THIS
WARRANTY SHALL NOT BE CHANGED OR MODIFIED IN ANY WAY WITHOUT
THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF BIO-TEK
INSTRUMENTS, INC.
ELx800 Operator's Manual
Summary of Contents for ELx800
