58
Problem solving
Manual processing of copy sets and
covers removed during jam clearance
During jam clearance, do not discard copy sets and covers
removed from the 301 DFS. Unless they are damaged, you can
use the Manual Feeder to process them into bound documents.
To do so, perform the following procedure:
Copy sets and covers removed from the 301 DFS
1. Verify that the copy set and cover are undamaged and
complete.
2. Manually insert the copy set into the cover according to
the page orientation.
3. Open the Manual Feeder door.
4. Insert the copy set with cover into the Manual Feeder.
NOTE:
Follow the directions on the labels adjacent to the
Manual Feeder area of the 301 DFS for the correct
positioning of the copy set with cover.
5. Select
1 & 2
(
None)
as the cover source from the
Cover
Supply
section on the Control Panel on the 301 DFS.
NOTE:
If no cover was present in the 301 DFS, insert just
the copy set into the Manual Feeder. Follow the directions
on the labels adjacent to the Manual Feeder area of the 301
DFS for the correct positioning of the copy set without
cover. Select the desired Cover Tray for automatic
insertion of the cover.
6. Press the
Manual Start
button on the Control Panel of the
301 DFS.
7. Retrieve the document from the Output Tray of the 301
DFS after the binding process has completed.
Note:
Refer to chapter 3, ”Making the documents”, for
complete information about using the Manual Feeder to
bind copy sets with covers.
Summary of Contents for 301 DFS
