78
Step 34: A Frame Roof Assembly
Part 3
E:
Place Canopy over (2357) A Frame Ridge making sure the bottom edges of tarp are even on both sides of
the assembly. (fig. 34.6)
F:
Secure one side of the Canopy by attaching to (2358) A Frame Roof End with 4 (S5) #8 x 1/2” Pan Screws
(with #8 flat washer). (fig. 34.6 and 34.7)
G:
Make sure the Canopy is smooth and tight then secure to the remaining (2358) A Frame Roof End with 4
(S5) #8 x 1/2” Pan Screws (with #8 flat washer). (fig. 34.6 and 34.7)
H:
Attach Canopy to each end of (2357) A Frame Ridge with 2 (S5) #8 x 1/2” Pan Screws (with #8 flat
washer). Install screws 1/2” from each edge. (fig. 34.6 and 34.8)
Fig. 34.6
2358
Fig. 34.8
Fig. 34.7
S5
1/2”
2358
x 4 per side
S5
x 2
Hardware
10 x #8 x 1/2” Wood Screw (#8 flat washer)
S5
1 x Canopy
Other Parts
#8 Flat
Washer
#8 Flat Washer
2357
Summary of Contents for HILLCREST F23270
Page 3: ...3 support solowavedesign com...
Page 4: ...4 support solowavedesign com...
Page 5: ...5 support solowavedesign com...
Page 110: ...110 support solowavedesign com NOTES...