33
A:
With both the Access and Cafe Walls
facing each other loosely attach (2372)
Front Ground to (2383) Posts with 2 (H4)
1/4 x 4” Hex Bolts (with lock washer, flat
washer and t-nut). Notice the extended
end is on the Cafe Wall side. (fig. 10.1)
B:
Loosely attach (2350) Front Floor to
both (2383) Posts with 2 (H5) 1/4 x 4-1/2”
Hex Bolts (with lock washer, flat washer
and t-nut), the arch should be on the right
side of the wall, and (2380) Middle Front
to both posts with 4 (H4) 1/4 x 4” Hex
Bolts (with lock washer, flat washer and
t-nut). (fig. 10.1)
C:
Check that assembly is square then
attach (2372) Front Ground to both
(2383) Posts with 2 (S7) #12 x 2” Pan
Screws (with flat washer). (fig. 10.1)
D:
Make sure assembly is square then
measure 17” from (2383) Post and
loosely attach (2377) Lower Post to
(2350) Front Floor with 1 (H3) 1/4 x 2-1/2”
Hex Bolt (with lock washer, flat washer
and t-nut) and to (2372) Front Ground
with 2 (S7) #12 x 2” Pan Screws (with flat
washer). (fig. 10.1)
E:
Loosely attach (2366) Centre Post to
(2350) Front Floor with 1 (H5) 1/4 x 4-1/2”
Hex Bolt (with lock washer, flat washer
and t-nut) from outside the assembly
and to (2380) Middle Front with 1 (H4)
1/4 x 4” Hex Bolts (with lock washer,
flat washer and t-nut) from inside the
assembly. (fig. 10.1)
F:
Make sure the top of (2350) Front
Floor measures 52” from the bottom of
(2372) Front Ground then tighten all bolts
in this step. (fig. 10.1)
4 x
#12 x 2” Pan Screw
(with 3/16” flat washer)
Hardware
Wood Parts
1 x
1/4 x 2-1/2” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
7 x
1/4 x 4” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
3 x
1/4 x 4-1/2” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
H3
1 x
Middle Front 1 x 5 x 46-5/8”
1 x
Centre Post 2 x 4 x 32-3/4”
1 x
Front Floor 5/4 x 4 x 46-3/4”
1 x
Lower Post 2 x 3 x 49-3/4”
1 x
Front Ground 1 x 5 x 88”
2380
2366
Step 10: Front Wall Assembly
Fig. 10.1
Cafe Wall
2377
2372
2350
with 3/16” flat
washer
H4
S7
H5
2383
2383
2380
H4
S7
S7
H5
H3
2366
Notice Arch
to this side.
H4
2350
2377
2372
H4
H4
Notice hole towards top.
52”
17”
1/4” lock
washer
1/4”
t-nut
1/4” flat
washer
with 3/16” flat
washer
Summary of Contents for HILLCREST F23270
Page 3: ...3 support solowavedesign com...
Page 4: ...4 support solowavedesign com...
Page 5: ...5 support solowavedesign com...
Page 110: ...110 support solowavedesign com NOTES...
