44
Step 18: Attach Access Ladder to Fort
Pre-drill all holes using a 3/16” drill bit before installing the Lag Screws
A:
Place the Access Ladder in the opening of the Access Wall, flush to the outside edge of (2371) Floor End
on the Swing Wall. Attach (2410) Right Access to (2371) Floor End with 1 (H12) 1/4 x 3” Hex Bolt (with lock
washer and flat washer and previously installed t-nut). (fig. 18.1 and 18.2)
B:
Attach (2374) Left Access to (2371) Floor End with 1 (LS4) 1/4 x 4” Lag Screw (with flat washer). (fig. 18.1
and 18.2)
C:
Attach (2395) SW Ground to (2374) Left Access with 2 (S2) #8 x 1-1/2” Wood Screws. (fig. 18.1 and 18.3)
Hardware
1 x
1/4 x 4” Lag Screw (1/4”flat washer)
1 x
1/4 x 3” Hex Bolt (1/4” lock washer, 1/4”flat washer, t-nut previously installed)
2 x
#8 x 1-1/2” Wood Screw
LS4
Swing Wall
Fig. 18.2
Fig. 18.3
2374
2371
1/4” lock
washer
2374
Fig. 18.1
1/4” t-nut
(previously
installed)
1/4” flat
washer
H12
2371
2395
S2
LS4
H12
Access Wall
1/4” flat
washer
2410
S2
2395
Summary of Contents for HILLCREST F23270
Page 3: ...3 support solowavedesign com...
Page 4: ...4 support solowavedesign com...
Page 5: ...5 support solowavedesign com...
Page 110: ...110 support solowavedesign com NOTES...
