26 | Wi-Q™ Mercury Setup and User Guide
after the initial configuration, click on the Username link in the up-
per right corner of the screen. In the following image, it is labeled:
Hello, admin!
Change the Default Username.
1. Click on the ‘Edit’ icon next to the ‘Username’ field.
2. Enter the new Username into the ‘New Username’ and
‘Confirm Username’ fields.
3. Click the ‘Update’ button to save the changes.
4. Click on the ‘Update’ button to confirm the changes in the
pop-up notification.
5. Click the ‘Close’ button to close the pop-up notification.
NOTE:
Once you change the password any Wi-Fi connection will
be terminated. You will have to go back to your mobile device and
change the connection password.
6. A purple light will flash confirming the deep reset.
7. Once the deep reset process has completed, wait 3-4 min-
utes before attempting to log back in to the Gateway. The
gateway LED will turn solid red when it is fully booted up
and ready for a Wi-Fi connection.
Follow the steps previously mentioned to enable Wi-Fi, reconnect,
and log in.
NOTE:
The deep reset will take the settings on the board and
restore them to the factory defaults.
3.2.5.2 Configure the WQXM-PG Gateway
Open the device’s browser window and navigate to the Gateway’s
web UI pages.
NOTE:
dormakaba recommends Google Chrome as the web
browser to navigate the WQXM-PG web pages.
3.2.5.2.1 Login Screen
Log in to the Gateway.
• The default Username is admin.
• The default Password is password.
NOTE:
The portal will log itself out after 10 minutes of non-use.
3.2.5.2.2 Manage Profile
The first time a Gateway is logged in to, the manage profile screen
will appear prompting to change the Username or Password. The
user will be prompted to change the Password every time the
Gateway is logged in to until it has been changed to something
other than the default. To update the Username and Password
3 HARDWARE INSTALLATION
