BERTHOLD TECHNOLOGIES LB 480, User Manual

Page: 327 / 450

SENSseries LB 480 Level measurement
BERTHOLD TECHNOLOGIES GmbH & Co. KG
3 – 327
Volume 3 Menu Structure
3
2.14
Config Slave Detectors
Menu path: Device Config

Setup

Sensor Configuration

Config Slave Detectors .
IMPORTANT
Date and time have to be checked before all other parameters and
updated, if necessary. If the device is more than a month out of
service, then an error message indicates that the date must be
updated.
1 Nbr of Slaves
Number of slaves that are connected to and have communication
with the master.
2 Add Slave
For multi-detector arrangements (cascading several detectors).

To add a slave detector, assign it a detector number between 1
to 16 and enter its device ID number.
3 Remove Slave

Interrupt the communication to a slave by entering its detector
number.
4 Refresh Slave Table
Updates the Detector Table .
5 Detector Table
Shows all slaves in a clearly laid out table that are connected to the
master and communicate with the master. The table also shows the
function of the connected detector.
• MEAS
The detector is used for multi-detector operation (cascading).
• COMP
The detector is operated as compensation detector. For exam-
ple, for automatic gas density compensation.
The table also indicates whether an error message in a detector is
present.
If no error is present, then 0 is displayed in the relevant column.
An error message is displayed with a three digit number. The cause
of the error and suggestions for correcting the error are described
in
"Error Handling" in chapter 8 .