manualshive.com logo in svg

Bernina 765 SE, Manual

Share
Download
Bernina 765 SE Manual Download Page 76

Creative sewing

77

Programming pattern repeat

>  Select a stitch pattern or alphabet.
>  Touch the icon «i»-Dialog.

>  Touch the icon «Pattern repeat» once to repeat the stitch pattern.
>  Touch the icon «Pattern repeat» again to repeat the stitch pattern up to 9 times.
>  Keep the icon «Pattern repeat» touched to deactivate the stitch pattern repeat.

Programming long stitch

The maximum length for long stitches is 12 mm and the machine sews every second stitch.
>  Select the stitch pattern.
>  Touch the icon «i»-Dialog.

>  Touch the icon «Long stitch».
>  Touch the yellow-framed icon to reset the alterations to default setting.

Mirror image of stitch patterns

>  Select a stitch pattern or alphabet.
>  Touch the icon «i»-Dialog.

>  Touch the icon «Mirror image left/right» to mirror the stitch pattern from left to tight.

>  Touch the icon «Mirror image up/down» to mirror the stitch pattern contrary to the sewing direction.
>  Touch the yellow-framed icon to reset the alteration to basic setting.

Editing stitch pattern length

The stitch patterns can be lengthwise extended or shortened.
>  Select a stitch pattern or alphabet.
>  Touch the icon «i»-Dialog.

>  Touch the icon «Edit stitch pattern length».
>  Move the slide with the touchscreen pen or the finger to determine the length of the stitch pattern.

x 

1017815.0.04_2016-05_Manual_B765_EN

Summary of Contents for 765 SE









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands