Attachment
174
Message on the display
Cause
Repair
The main motor isn't running.
> Turn the handwheel clockwise until the needle is at its
top position.
> Remove the stitch plate.
> Remove the thread remnants.
> Clean the hook.
> Remove the hook and make sure that there are no
pieces of broken needle points on the magnetic back of
the hook.
> Deactivate the thread catcher in the Setup Program.
Incorrect presser foot for the
BERNINA Dual Feed.
> Attach a presser foot with the designation «D».
The fabric under the presser foot
is too thick.
> Reduce the fabric thickness.
The contact between the
machine and the embroidery
module is interrupted due to
vibrations.
> Make sure that the module and the machine are
standing on a stable, even surface.
> Connect the embroidery modul to the machine.
The needle position doesn't
correspond with the center of the
hoop.
> Calibrate the hoop.
The embroidery module is not
attached.
> Connect the embroidery modul to the machine.
> Contact the specialized BERNINA dealer to have the
machine checked.
1017815.0.04_2016-05_Manual_B765_EN
Summary of Contents for 765 SE
Page 1: ...BERNINA 765 SPECIAL EDITION...
Page 200: ......
