Embroidering preparation
139
> Push the clamping lever up.
> Remove the presser foot.
> Insert the embroidery foot from below into the bracket.
> Press the clamping lever down.
Selecting the stitch plate in the User Interface
After having attached the appropriate embroidery foot (Embroidery foot No. 26, supplied accessory) it can be
selected and saved on the machine. Moreover optional presser feet can be displayed which are available for
the currently selected embroidery motif.
> Switch the machine on.
> Select the embroidery motif.
> Touch the icon «Presser foot display/Presser foot selection».
> Select the attached embroidery foot.
13.4 Needle and stitch plate
Inserting the embroidery needle
Embroidery needles of the type 130/705 H-SUK provide a larger eye and are slightly rounded. This avoids
thread abrasion when using Rayon- and cotton embroidery thread. Depending on the embroidery thread
use a size No. 70-SUK to No. 90-SUK needle.
> Raise the needle.
> Switch the machine off and disconnect it from the power supply system.
> Remove the attached foot.
1017815.0.04_2016-05_Manual_B765_EN
Summary of Contents for 765 SE
Page 1: ...BERNINA 765 SPECIAL EDITION...
Page 200: ......
