My BERNINA
24
Illustration
Name
Purpose
Height compensation
tool
The height compensation tool levels an angled
position of the presser foot sole when sliding over
thick seams.
Selection of needles
The needle assortment contains different versions
and sizes of needles for all the common
applications.
Seam guide, right
The seam guide is very useful as a guideline on the
right of the needle. It supports the alignment of
regular seam distances.
Screwdriver Torx, gray
Use the gray screwdriver Torx to change the
needles.
Screwdriver red
The red screwdriver is supplied as an all-round tool.
Angular Torx button
Using the angular Torx wrench the headframe can
be opened.
Brush
The brush is used to clean the feed dog and the
hook area.
Lubricator
The lubricator is used to fill up the oil depots.
Power cable
The power cable connects the machine with the
power supply system.
Foot control
Via the foot control the machine is started and
stopped. The speed of the machine is also
controlled via the foot control.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!
1017815.0.04_2016-05_Manual_B765_EN
Summary of Contents for 765 SE
Page 1: ...BERNINA 765 SPECIAL EDITION...
Page 200: ......
