manualshive.com logo in svg

Bernina 765 SE, Manual

Share
Download
Bernina 765 SE Manual Download Page 55

Setup Program

56

>  Touch the icon «Secure» to deactivate the automatic securing.
>  Touch the icon «Secure» again to activate the automatic securing.

Programming the button «Thread cutter»

The automatic securing can be programed before the thread cut takes place.
>  Touch the icon «Setup Program».

>  Touch the icon «Sewing settings».

>  Touch the icon «Programm buttons and icons».

>  Touch the icon «Program the button Thread cutter».

>  Touch the icon «Secure» to sew 4 securing stitches in place.

>  Touch the icon «Alter the number of securing stitches» to program the securing stitches in close 

succession.

>  Touch the icons «-» or «+» to program the number of securing stitches.

>  Touch the icon «Securing stitches in place» to program 4 securing stitches in place.

>  Touch the icon «Secure» to deactivate the automatic securing.
>  Touch the icon «Secure» again to activate the automatic securing.

Adjusting the presser foot position with needle stop down

With lowered needle, 3 different presser foot position can be selected: the presser foot lowered, the presser 
foot is raised to hovering position and the presser foot is raised to its maximum height.
>  Touch the icon «Setup Program».

>  Touch the icon «Sewing settings».

>  Touch the icon «Programming buttons and icons».

>  Touch the icon «Adjusting the presser foot position with needle stop down».

1017815.0.04_2016-05_Manual_B765_EN

Summary of Contents for 765 SE









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands