Setup Program
68
> Touch the icon «Clean the thread catcher».
> Clean the thread catcher according to the instructions on the display.
Lubricating the machine
CAUTION
Electronically driven components
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply system.
NOTICE
Lubricating the hook
Too much oil can result in staining the fabric or the thread.
> Give one drop of BERNINA oil in each of the two oil depots. Sew/Embroider on a test piece first.
The Setup Program provides animations how the machine has to be oiled. In chapter «Maintencance and
cleaning» there are more illustrated step by step instructions (see page 166). Use BERNINA oil to lubricate.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Lubricate the machine».
> Lubricate the machine according to the instructions on the display.
Packing the embroidery module
To pack the embroidery module into the original packaging without moving the embroidery arm manually,
the embroidery arm needs to be brought to its packing position.
Prerequisite:
• The embroidery module is connected with the machine.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Pack position for the embroidery module».
> Follow the instructions on the display.
1017815.0.04_2016-05_Manual_B765_EN
Summary of Contents for 765 SE
Page 1: ...BERNINA 765 SPECIAL EDITION...
Page 200: ......
