manualshive.com logo in svg

Bernina 765 SE, Manual

Share
Download
Bernina 765 SE Manual Download Page 61

Setup Program

62

3.4  Monitoring functions

Activating the upper thread indicator

>  Touch the icon «Setup Program».

>  Touch the icon «Monitoring settings».

>  Touch the switch in the upper section of the display to deactivate the upper thread indicator.
>  Touch the switch again to activate the upper thread indicator.

Activating the bobbin thread indicator

>  Touch the icon «Setup Program».

>  Touch the icon «Monitoring settings».

>  Touch the switch in the lower section of the display to deactivate the bobbin thread indicator.
>  Touch the switch again to activate the bobbin thread indicator.

3.5  Activating the audio signals

>  Touch the icon «Setup Program».

>  Touch the icon «Audio signals».
>  Touch the switch (1) to deactivate any audio signals in general.
>  Touch the switch (1) again to activate any audio signals in general.

>  In the section (2) touch the icons «1 – 4» to set up the desired signal for the selection of a stitch pattern.

>  In the section (2) touch the icon «Loudspeaker» to deactive the signal for the selection of a stitch pattern.
>  In the section (2) touch the icon «Loudspeaker» again to active the signal for the selection of a stitch 

pattern.

>  In section (3) touch the icons «1 – 4» to activate the desired signal when selecting a function.

>  In the section (3) touch the icon «Loudspeaker» to deactivate the signal when selecting a function.
>  In the section (3) touch the icon «Loudspeaker» again to activate the signal when selecting a function.

>  In the section (4) touch the icon «Loudspeaker» to deactivate the signal when using the BSR modes.

1017815.0.04_2016-05_Manual_B765_EN

Summary of Contents for 765 SE









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands